Difficulty: Easy

Time Required: Varies based on number of rooms.

Here's How:

• Take the clapboard and place it properly. Draw a line on the end and the back of the clapboard, exactly from where it has to be cut.
• Do the same with the place where clapboard has to be installed.
• Cut the clapboard using aa X-Acto miter across the drawn line.
• After cutting the piece, place it at the intended place to check the size whether it fits or not. Make sure that it fits perfectly.
• Cut all the pieces accordingly. Continue applying the same method until all the pieces are cut according to the size required for installing the clapboard.

Tips:

• The two pieces of clapboard should match each other in order to look alike.
• For a 1-inch scale doll house, 3/8 inch clapboard is preferable. If you are looking for ½ inch doll house, we will recommend you to apply ¼ inch clapboard. If you are thriving for a wider clapboard look, use ½ inch clapboard.
• Before attaching to the house, smooth the Quick Grip with a small stick to cover the surface of the clapboard completely.
• While putting the piece on the wall, double check it’s position. Be sure it is in the right position.
• Always check the top edges for overlap.

What You Need:

• X-Acto miter
• Glue
• Pencil and ruler
• Cutting Board