Dollhouse
lights are easier to fit than what is the popular opinion.
Dollhouse lights make your doll house seem more real and
also add a warm atmosphere to your doll house. Dollhouse
lights also impart a certain feel to your doll house.
Before you go about fitting the dollhouse lights, you
have to decide on the doll house lights system you are going
to use. The two most common doll house lights systems are
the copper tape system and the twin wire system. You may
have your own preferences as to which doll house lights
system to use but the twin wire method is recommended. The
reasons for recommending this system are that this system
of doll house lights is easier to install, you are less
liable to wrong in this and it is less expensive than the
other system of doll house lights.
The twin wire system of doll house lights works in the
following way. A power strip is attached to the back of
the house to which wires from a transformer go in. the transformer
itself is attached to the mains. Many doll house lights
have a length of 24 inches of wire with a plug at the end
which is standardized to the power strip. To get started
on the doll house lights you need to simply plug in the
lights to the power strip.
The doll house lights location in the doll house should
be decided while the doll house is still in the kit form.
This is because the routes of the doll house lights wires
in the doll house may spoil the other decorations of the
doll house such as wall paper and flooring.
|
